Mechanical
Tensile test with E modulus
High Speed Tensile Test
Bending test with E modulus
Izod
Charpy
Penetration test
Ball indentation hardness
Rockwell hardness
Shore A and Shore D
Tensile impact test
Tear propagation / separation / shear / peel tests
Compression test
Shear test
Taber abrasion test
Tensile creep test
Flexural creep test
Rheological
Heat resistance
Thermal analysis
Physical
Electrical
Combustion (Fire)
Thermal aging
Weathering
Optical
Chemical resistance
Shrinkage
Standards:
ISO 9352
DIN 53754
ASTM 1044
or corresponding standards

Taber abrasion test
This method is suitable for testing the abrasion resistance of surfaces and coatings. Two rollers covered with emery paper chafe over the rotating test specimen surface, and simulate different stresses by varying the grain size and contact pressure. Transferring the data obtained from this test is generally only possible if the test conditions correspond to the practical situation.
Otherwise it is intended for comparative material assessments.
Result of the test method:

Abrasion in mg/x revolutions and possible subsequent measurement of cloudiness.